1-10 / 3523 hits

1.

Rhine Seiko Co.,Ltd Location:  Gifu  Kakamigahara-shi Maedohigashicho 4-180 Employees 31

Our company specializes in the manufacture of single parts and jigs, and molds. We can perform cutting and grinding after heat treatment of hard-to-process (cemented carbide, ceramic) and high hardne...

Resin Mold

Resin Mold for corrugated tube, vacuum We could make mold parts without drawing. (Measurement → Drafting → Production) Feel free to contact us!

Main 3 products Mold production for cold forging  Cemented carbide mold, jig production  Inspection jig, high hardness material processing
Type of manufacturing Machine tools  Measuring machinery  Jigs and tools
Recommended manufacturing category

1:Die manufacturing - Forging die - Cold forging die

2:Die manufacturing - Forging die - Hot forging die

3:Die manufacturing - Forging die - Press forging die

4:Die manufacturing - Powder metallurgy mold - Ceramic die

5:Die manufacturing - Powder metallurgy mold - High rigid die

6:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

7:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing

8:Development and production of prototype/Small-scale production - Jig manufacturing - Mass production jig manufacturing

9:Development and production of prototype/Small-scale production - Grinding processing - Cylindrical mirror grinding

10:Die manufacturing - Press die - Part processing

2.

Plamoul Seiko Co.,Ltd. Location:  Miyagi  Kurokawa-gun Tomitani-chou Takanosha 4-3-5 Employees 42

“The Degassing Revolution: Unbelievable Degassing. Better Quality and Reduced Cost.” Have you ever faced with a problem during conservation of injection moulds and/or cast moulds due to poor degass...

“Gas-tosu” (Registered trade name), Ejector-Pin, Core-Pin with gas-venting function

“Gas-tosu,” Ejector-Pin, Core-Pin with gas-venting function "Gas-tosu" is a registered trade name. "tosu" is a Japanese word, and it means making something pass. Therefore, "Gas-tosu" is the tool which makes gas pass. ◆The features of Gas-tosu Gas-tosu is used as Ejector-pin or Core-pin with gas-venting (air-venting) function. The vent width in Gas-tosu can be selected from 0.005~0.05mm according to the fluidity of resin. Therefore, Gas-tosu is acceptable to every kinds of resin. The inclined-processing is being performed into Gas-tosu to efficiently exhaust the gas which occurs in die. Installing the gas vent with the width which is 0.005~0.05mm is possible according to the fluidity of resin.

Main 3 products Spool, Runner parts, ejector pin for electronic products  Core pin, Precision Moulds  Mould parts, Connector for electronic parts
Type of manufacturing Jigs and tools  Electronic parts  Not selected
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Part processing

2:Die manufacturing - Plastic mold - Designing

3:Die manufacturing - Plastic mold - Manufacturing

4:Designing - Mold designing - Injection molding die

5:Die manufacturing - Plastic mold - Injection molding die

6:Material - Plastic material distribution - ABS resin

7:Material - Plastic material distribution - PP (polypropylene)

8:Material - Plastic material distribution - PC (polycarbonate)

9:Material - Plastic material distribution - POM (polyoxymethylene)

10:Die manufacturing - Plastic mold - Thermoset resin die

3.

Chimera Co., Ltd. Location:  Hokkaido  Muroran 24-16 Kagawa-cho Employees 135

We are a plastic and press die maker with expertise in ultra precise and microfabrication. By combining our latest equipment operating 24 hours a day with our skilled techniques, we perform precisi...

Injection molding mold for plastic mug, Non-magnetic steel

"We are good at designing and manufacturing molds for molding plastic mugs. We are also accustomed and have extensive experience to process HPM75 (high hardness non-magnetic free-cutting material). Since non-magnetic steel cannot be magnet-chucked, it requires particular scheming to hold it. If you have any concerns or problems with the processing of non-magnetic steel, please feel free to contact us."

Main 3 products Molding (plastic) dies, press dies, various mold components processing, precision metal machining [design, manufacture, testing]  In order to meet needs for quick delivery, we stock various die materials such as NAK, SKS, SKD, high speed steel and ultra-hard materials.  With our high speed cutting machining center,
Type of manufacturing Electronic parts  Office automation equipment  Audio-video equipment
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Part processing

2:Designing - Mold designing - Injection molding die

3:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining

4:Development and production of prototype/Small-scale production - Grinding processing - Jig boring

5:Development and production of prototype/Small-scale production - Grinding processing - Jig grinding

6:Die manufacturing - Press die - Plate machining

7:Die manufacturing - Press die - Die set machining

8:Die manufacturing - Plastic mold - Core and cavity machining

9:Die manufacturing - Plastic mold - Thin wall injection molding die

10:Die manufacturing - Plastic mold - Cassette-type molding die

4.

Yoneyama Mold.Co.,Ltd Location:  Nagano  Shimoina-gun 402-12 Ojima, Matsukawa-cho Employees 28

We are constantly pursuing the latest technology and constantly evolving in order to provide plastic molds that are trusted by our customers. In particular, in the field of microfabrication, we have 4...

Precision measurement, hape observation, measurement consignment, High precision measurement

Precision measurement, Shape observation, Consignment measurement A precision measuring machine is required to manufacture microfabrication, precision machining, and high-precision molds. In addition, it is necessary to observe the shape of microneedles, microchannels, etc. by using an electron microscope (SEM). Therefore, we have a precision image measuring machine, a surface roughness measuring machine, and an electron microscope. We also carry out outsourced measurements, so please feel free to contact us. For further information, please contact us! Yoneyama Mold.Co.,Ltd 〒339-3304 402-12 Ojima, Matsukawa-cho, Shimoina-gun, Nagano Prefecture Tel: 0265-36-5476 Fax: 0265-36-6310 URL: http://www.y-mold.com

Main 3 products Plastic mold design and manufacturing  Plastic mold parts processing  Machining, wire discharge, carving electric discharge machining
Type of manufacturing Home electrical appliances  Electrical component for transportation equipment  Audio-video equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

2:Die manufacturing - Plastic mold - Part processing

3:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

4:Die manufacturing - Plastic mold - Injection molding die

5:Die manufacturing - Plastic mold - Insert molding die

6:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

7:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining

8:Development and production of prototype/Small-scale production - Grinding processing - Plane grinding

9:Die manufacturing - Plastic mold - NC data creation

10:Designing - Mold designing - 3D modeling (plastic)

5.

KYOEI PRINT GIKEN.,Inc. Location:  Tokyo  Chofu-city,  1-21-1 Tamagawa,  Employees 60

We have four domestic sites and three overseas sites, consisting of the Die Division and the Micro-manufacturing Division. The Die Division manufactures each dies of punching, compound, combination, p...

Micro-shaped cutting (Timepiece parts, dial)

NAOYA HIDA & Co.は、飛田直哉氏が手がける時計ブランドです。 熟練職人による手作業と最新鋭工作機械による加工を組み合わせた現代のヴィンテージ ウォッチ 協栄プリント技研株式会社では、独自の技術で微細切削加工した、 時針、分針、秒針、ピンバックル、文字盤等を提供しております。

Main 3 products Precision press dies [Design, manufacture and sales]  Micro-manufactured parts [Manufacture and sales]  
Type of manufacturing Not selected  Not selected  Not selected
Recommended manufacturing category

1:Die manufacturing - Press die - Blanking die

2:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

3:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

5:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

6:Die manufacturing - Rubber mold - Light electrical/earthing rubber

7:Die manufacturing - Press die - Fine blanking die

6.

Ascon Co., Ltd. Location:  Aichi  Komaki City Higashitanaka 2141 Employees 10

Ascon Co., Ltd. specializes in automotive interior press dies and dedicated machines for surface pressure tightening. We can respond quickly to the materials of automotive interior parts that keep cha...

Recycled pallet, pallet, recycled materials of containers and packaging

This is a pallet made from recycled materials of containers and packaging. We do product design and mold production. Type Size Weight Both sides 1100×1100×150 35 kg One side 1100 x 1100 x 150 34 kg, hand lift possible Both sides (light weight) 1100×1100×150 26 kg One side (light weight) 1100×1100×150 25 kg, hand lift possible Both sides (light weight) 1400 x 1100 x 140 34 kg Movable load: 1t (Dynamic load) ・ 3t (Static load) We also do sales. Please feel free to contact us for product design, mold production, manufacturing and sales of various pallets.

Main 3 products Automotive interior press die, dedicated machine for surface pressure tightening  KP sheet, kenaf, deck, KPla sheet  Recycling pallets, variable pallets, plastic floor board, pliers
Type of manufacturing Not selected  Not selected  Not selected
Recommended manufacturing category

1:Designing - Mold designing - General metal press die

2:Die manufacturing - Press die - Manufacturing

3:Die manufacturing - Press die - Blanking die

4:Die manufacturing - Press die - Designing

5:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

7:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing

7.

Noda (Thailand) Co., Ltd. Location:  Samut Prakan  Bangsaothong District 55/53 Moo15 Bangsaothong sub-District, Employees 30

Increasing the productivity and Upgrading. Making an amazing die with full speed. Noda is company of die. We are making a die which can be increasing the productivity and upgrading. Do you not have ...

Main 3 products Die cutter    
Type of manufacturing Not selected  Not selected  Not selected
Recommended manufacturing category
8.

MASA DESIGN Location:  Tokyo  mizuho musashino 2-24-20 Employees 3

The Excellent Craftsmanship creates Superior Mold products. Our company has been developing, designing,manufacturing, mass-producing and supporting 3D products in various indust...

Plastic Injection Mold (250Ton)

MAKINO BN85 A6 (Max8000rpm) super Gi mode Cutting

Main 3 products Plastic injection Mold 30t to 300t class molds  Plastic injection Mold 300t to 650t class molds  DieCasting Mold 100t to 550t class molds
Type of manufacturing Medical equipment  Electrical component for transportation equipment  Telecommunication equipment
Recommended manufacturing category

1:Die manufacturing - Plastic mold - 60 - 300 t

2:Die manufacturing - Plastic mold - Over 300 and less than 1,000 t

3:Die manufacturing - Casting die - Die-casting die

9.

Wakazono Seiki Co., Ltd. Location:  Gifu  Yoro-cho, Yoro-gun 450 Murohara Kogurisu Employees 15

Started joint research and development with Professor Yamagata of Gifu University. * In 2009, we were allocated assistance subsidies for the development of small to medium-sized manufacturer product...

Wakazono Seiki Mold Manufacturing Case

< Die-Casting Die > Block cylinders, gearbox casings, chain covers < Low-Pressure Casting > Head cylinders, block cylinders < Shell Molds > WJ cores, OJ cores, port cores, headframe cores < Gravity Casting > Intake manifolds, differential carriers, knuckle steerings

Main 3 products Die-casting dies: block cylinders, gearbox casings, chain covers. Low-pressure casting: head cylinders, block cylinders  Shell molding models: WJ cores, OJ cores, port cores, headframe cores. Gravity casting models: intake manifolds, differential carriers, knuckle steerings.  Head cylinders, chains and covers, head covers, power steering and racks, block cylinders, lower casings, housing/transmissions/axles, casings/transmissions/axles, differential carriers and? covers, RE carriers (incl. FR knuckles)
Type of manufacturing Transportation equipment  Not selected  Not selected
Recommended manufacturing category

1:Die manufacturing - Casting die - Die-casting die

2:Die manufacturing - Casting die - Shell moulding die

3:Die manufacturing - Casting die - NC data creation

10.

Meiho Co., Ltd. Location:  Fukuoka  Nogata City 811-1 Ganda Employees 178

Three reasons why Meiho is chosen 1. Reliable quality of precision molds and molded products ・ Mold design that incorporates knowledge from the molding site ・ High-precision mold design and ma...

Pipe coupling parts for automobiles [HDPE small lot trial production mass production injection molding resin]

Material: HDPE (High Density Polyethylene) Work: Injection molding Shape / size: 95mm x 58mm Industry / Part Name: Automotive Industry Equipment name: Horizontal injection molding machine 110t Functionality: High rigidity, impact resistance, water resistance, chemical resistance, insulation Details of improvement: Resin replacement Response: Small lot, trial production, mass production Remarks: A part for connecting resin fuel filler pipes for automobiles (near the fuel filler port).

Main 3 products Precision plastic molding mold   Precision plastic molded products  Small injection molding machine
Type of manufacturing Industrial machinery  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Plastic - Thin wall molding

2:Die manufacturing - Plastic mold - Thin wall injection molding die

3:Die manufacturing - Plastic mold - Injection molding die

4:Designing - Mold designing - Injection molding die

5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing

6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

7:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

8:Development and production of prototype/Small-scale production - Prototype processing - Simplified/Molding

9:Die manufacturing - Plastic mold - Thermoset resin die

10:Die manufacturing - Plastic mold - Blow molding die

1-10 / 3523 hits

New registration