71-80 / 20502 hits

71.

Hikifune Co., Ltd. Location:  Tokyo  Katsushika Higashi Yotsugi 2-4-12 Employees 150

Our goal and dream is to express the Japanese’s delicacy and sensitivity in the terms of Made in Japan, Made in Tokyo, and/or Made in Katsushika towards the world. That is what we call it the “Hikifun...

HiC, Hard Chrome Plating, And Chromium Plating: Highly Corrosion Resistant, Wear Resistant, And Salt Water Resistance.

At our company, we suggest to our valued customers to use high corrosion resistance chromium plating (HiC) as a replacement of conventional chromium plating. This plating is differing from any other plating in which it can be used for both decorative flash and thick chromium plating. Usual flash plating layer thickness is 0.2~0.5μm; however, HiC plating thickness can be controlled while used in a mass production line. Each year, the number of hard chromium plating companies is decreasing. In some cases, they may have the ability to chromium plate products but do not have the ability to handle mass amount. Unlike those companies, we have his ready to be used and having the ability to handle 1/lot ~ million or a few million/ lot. As a side note, HiC is highly tolerance against salt water (sea water). □45h CASStesting with rating of No.95 is available. □Since the plating hardness is over 1000Hv, it has great abrasive resistance (tested within our facility). □Can be used as a replacement of conventional hard chromium plating. □Since it is strong against salt water, it can be applied to motor boats, fishing equipment, marine leisure related, etc. □Since the plating thickness can be controlled, it provides flexible designing. □Can be applied to travelling bags, suitcases, and any other products that are meant to be used for a long period of time. HiC is differing from conventional hexavalent chromium in the way that it was introduced with the idea of improving plating environment to help those plating technicians. As of course, it is environmental friendly. For corrosion resistance, abrasive resistance, salt resistance, please feels free to contact us.

Main 3 products Precise Plating (Electroless Nickel, Lubrication Plating, Composite Plating)  Gold, Silver, and Tin Plating onto Semiconductor Parts  Ultra-precise Pattern Copying Technology And Mold Making
Type of manufacturing Electronic parts  Home electrical appliances  Telecommunication equipment
Recommended manufacturing category

1:Surface treatment - Plating/Chemical conversion treatment - Nickel chromium (rack)

2:Surface treatment - Plating/Chemical conversion treatment - Gold/Silver plating

3:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (rack)

4:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (barrel)

5:Surface treatment - Plating/Chemical conversion treatment - Aluminum

6:Surface treatment - Plating/Chemical conversion treatment - Titanium

7:Surface treatment - Plating/Chemical conversion treatment - Stainless steel

8:Surface treatment - Plating/Chemical conversion treatment - Magnesium

9:Surface treatment - Plating/Chemical conversion treatment - Rhodium

10:Surface treatment - Plating/Chemical conversion treatment - Tin (barrel)

72.

Horikoshi Seiki Co., Ltd. Location:  Tokyo  Ohta-ku 1-16-1 Omorinishi Employees 35

We solve your problems. We can handle everything up to assembly, mainly with NC lathes and machining centers. What are your unit cost, quality and design problems? Horikoshi Seiki can consult you on t...

In addition to NC lathes and machining centers, we also use a CNC 5-axis composite machine for 3-D processing. Make sure to consult with us.

We can also perform 3-D processing with a CNC 5-axis composite machine. Even if you have complex shapes, we can easily process them. If you have materials that are hard to process, we resolve your problems right away.

Main 3 products Machining (MC) processing  Precision and composite processing with five-axis processing machines, composite NC lathes and machining centers  We not only handle metal processing, but also offer total manufacturing coordination by employing various kinds of surface processing, heat treatment, precision polishing and more in our Ohta Ward area network.
Type of manufacturing Medical equipment  Industrial machinery  Telecommunication equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Aluminum alloy

2:Parts manufacturing - Machinery part - Optical parts manufacturing

3:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining

4:Development and production of prototype/Small-scale production - NC machining - NC lathe machining

5:Development and production of prototype/Small-scale production - Machining - Stainless steel

6:Development and production of prototype/Small-scale production - Machining - Iron

7:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

8:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

9:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

10:Development and production of prototype/Small-scale production - Machining - Copper alloy

73.

Endo Manufacturing Co., Ltd. Location:  Niigata  Tsubame 5-3 Chuo-dori Employees 81

At Endo Manufacturing, we manufacture ultra-thin, stainless steel pipes (metal sleeves) at our Thailand and Vietnam factories that are used in printer parts and other parts. Through our original manuf...

Metal sleeves - Extremely thin, highly precise and seamless -

Materials: stainless steel, copper alloy, nickel alloy, clad materials, titanium, etc. Industry: office automation equipment, automotive (mass production), space, new energies, etc. Volume: minimum from 1,000 to 100,000 or more items can be handled. (Test production is also possible with precondition of mass production.) Endo Manufacturing Co., Ltd. primarily produces stainless steel metal sleeves (ultra-thin stainless steel pipes). Metal sleeves are seamless pipes that can be built up to 20-μm thin out of stainless steel. We are now developing battery casings, motor covers, seamless steel belts and more for new uses, primarily in automobiles and office automation equipment.

Main 3 products Stainless steel products  Metal sleeves  High-precision seamless pipes
Type of manufacturing Office automation equipment  Transportation equipment  Medical equipment
Recommended manufacturing category

1:Mass production - Mechanical processing - Seamless

2:Mass production - Mechanical processing - Ultra-thin

3:Parts manufacturing - Machinery part - pipe manufacturing

4:Mass production - Mechanical processing - Stainless

5:Mass production - Mechanical processing - Titanium

6:Mass production - Mechanical processing - Nickel alloy

7:Mass production - Mechanical processing - Clad

9:Mass production - Mechanical processing - High precision

74.

Taiyo Valve Manufacturing Co., Ltd. Location:  Tokyo  Ohta-ku 8-42-2 Chuo Employees 50

We develop, design and produce a wide variety of flow gauges, flow relays, sight glass and special valves. Currently we are working on fluid experiments and analysis in special environmental condition...

V Port Flow Adjusting Valve. Easy to Adjust the flow. Lock handle. Clogging.

★Easy to adjust the flow A V-port type flow adjusting valve with a measure which the flow can be adjusted simply by turning the handle. There is no dead band on opening. Also, the lock handle will hold and maintain the adjusted positing. ★Example Placing our product to places where constant flow clogs frequently.

Main 3 products Flow gauges  Flow switches  Sight glass
Type of manufacturing Measuring machinery  Industrial machinery  Heavy electric machinery
Recommended manufacturing category

1:Product manufacturing - Production property - Fluid equipment manufacturing

2:Product manufacturing - Plant equipment manufacturing - Marine vessel equipment manufacturing

3:Product manufacturing - Production property - Measurement/testing devices manufacturing

4:Product manufacturing - Production property - Environmental equipment manufacturing

5:Product manufacturing - Production property - Chemical industry machinery and equipment manufacturing

6:Parts manufacturing - Machinery part - Valve manufacturing

75.

Iwamoto Model Co., Ltd. Location:  Osaka  Neyagawa 30-10 Takamiyasakae Employees 90

We offer prototype models with high cost performance and quickly develop customers' prototype models at low cost by employing sheet metal, cutting, rapid photoforming, cast and injection molding. We p...

24-hour production with 46 NC machines.

46 NC machines are connected to a DNC server so that we can produce 24 hours a day. We have significantly shortened manufacturing time for plastic and metal prototype models and can even flexibly respond to rush orders.

Main 3 products Prototype models  Vacuum-cast models (silicon models, acrylic form)  Simple aluminum die production
Type of manufacturing Home electrical appliances  Office automation equipment  Telecommunication equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Prototype processing - Plastic protocol machining

2:Development and production of prototype/Small-scale production - Prototype processing - Vacuum injection molding

3:Die manufacturing - Plastic mold - Injection molding die

4:Mass production - Plastic - Injection molding

5:Development and production of prototype/Small-scale production - NC machining - NC lathe machining

6:Parts manufacturing - Machinery part - Gear manufacturing

7:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

8:Development and production of prototype/Small-scale production - Prototype processing - Photoforming

9:Surface treatment - Coating - Air-spray coating

10:Assembly/Inspection - Inspection - Measuring

76.

Shirasaki Manufacturing Co., Ltd. Location:  Tokyo  Katsushika-ku 4-1-12 Shiratori Employees 50

We mainly perform engineering plastic cutting, as well as molding and grinding. We have particular expertise in EG and Bakelite molding, and we have a large stock of general engineering plastic materi...

Non-ferrous Metal Processing

We have a non-ferrous metal production base in Akita, and we can also process nonferrous metals like aluminum, brass and titanium, as well as process with our CNC machining center's 3-D processing and CNC composite lathes to meet the various needs of our customers.

Main 3 products Lapping carriers and polishing carriers  Nonferrous cutting, resin cutting and transport jigs  General engineering plastic parts, cutting, molding and grinding
Type of manufacturing Industrial machinery  Electronic parts  Not selected
Recommended manufacturing category

1:Mass production - Plastic - Engineering plastic

2:Mass production - Plastic - Thermoset resin

3:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

4:Development and production of prototype/Small-scale production - NC machining - NC lathe machining

77.

Daiwa Plastics Co., ltd., Location:  Osaka  Kitaku, Sakai 5-1-10 HigashiMikunigaoka-cho Employees 20

We are cured and thermoplastic resin molded product manufacturer. Our offices and factories are located in Osaka, Miyazaki and Hanoi and Ho Chi Minh, Vietnam. We specialize in manufacturing small an...

Integrated Manufacturing In Japan, Multilayer Tube Container, Barrier Layer

Multilayer tube container with a barrier layer which provides antioxidant, prevention of fragrance omission and contaminant infiltration inhibition. Special five layers: polyethylene, adhesive layer, barrier layer, adhesive layer, and polyethylene, created using injection molding. We also have achievements in a cosmetics and cleansing foam container manufacturing. Integrated manufacturing line for tube container from manufacturing to appearance printing. Material:Low density polyethylene, high density polyethylene Tube Diameter:φ35、φ40、φ45、φ50 ZO

Main 3 products Automobile Parts (Thermosetting Resin Pulley)  Heavy Electronic Industrial Machinery Parts (Breaker Parts)  Composite Molding with Metals
Type of manufacturing Not selected  Not selected  Not selected
Recommended manufacturing category

1:Mass production - Plastic - Thermoset resin

2:Mass production - Plastic - Insert molding

3:Mass production - Plastic - GFRP (glass fiber reinforced plastic)

4:Mass production - Plastic - Injection molding

5:Mass production - Plastic - Engineering plastic

6:Mass production - Plastic - Compaction moldingicompression, direct pressurej

7:Mass production - Plastic - Rotational/Slash/Dip molding

8:Mass production - Plastic - PPS (polyphenylene sulfide)

9:Mass production - Plastic - General-purpose material

10:Mass production - Plastic - Thin wall molding

78.

Shinco Metalicon Co., Ltd. Location:  Shiga  Yoshinaga, Konan 405 Employees 75

We are a specialized spraying maker boasting the longest history in Japan. We perform spraying and blasting of all metals, ceramics and cermets, as well as jobs including any supplementary work. Inqui...

What is spraying?

Spraying is a technique to improve a surface by using various heat sources to melt metal, ceramic, cermet, etc. and eject it, thus forming a functional film on the surface of the base material.

Main 3 products Spraying (WC cermet, ceramics, metal, alloy, resin and more)  Rust and corrosion preventive spraying, on-site construction (spraying, blasting and more)  Blasting (alumina grit, glass beads, etc.)
Type of manufacturing Office appliances  Machine tools  Industrial machinery
Recommended manufacturing category

1:Surface treatment - Other surface treatment - Spraying

79.

Tashiro Ironworks Co., Ltd. Location:  Kanagawa  Kanagawa-ku, Yokohama 6-7 Kaminoki-cho Employees 60

Our company is an engineering firm that covers factory maintenance, canning, piping and machinery, including design. We lead a team of designers and project managers in each of the above fields and ca...

Our support for manufacturing test machines intended for developing cutting-edge technology extends to on-site installation.

Over the course of our company's long history, we have designed, manufactured and even provided on-site installation of numerous prototype machines to develop cutting-edge technology and large-scale production lines. Small items are fine too, so make sure you try our company's service. We firmly believe that our product will satisfy you.

Main 3 products Complete projects such as piping and canning  Large can manufacturing (tanks, ducts, covers, piping)  Glass-related manufacturing facilities
Type of manufacturing Industrial machinery  Not selected  Not selected
Recommended manufacturing category

1:Designing - Industrial equipment designing - Industrial machinery designing

2:Assembly/Inspection - Repair - Industrial machinery repair

3:Assembly/Inspection - Assembly - Industrial machinery assembly

4:Product manufacturing - Production property - Other industrial machinery manufacturing

5:Product manufacturing - Plant equipment manufacturing - Plant equipment manufacturing

6:Product manufacturing - Construction and civil engineering machinery manufacturing - Pipe connection

7:Product manufacturing - Production property - Energy-saving equipment/Automatic instrument manufacturing

8:Product manufacturing - Production property - Carrier machine manufacturing

9:Development and production of prototype/Small-scale production - Sheet-metal processing - Can manufacturing

10:Development and production of prototype/Small-scale production - Sheet-metal processing - Chassis manufacturing

80.

Alphatec Corporation Location:  Aichi  Nishikamo-gun 1-133 Aza Hannoki, Oazamiyoshi, Miyoshi-cho Employees 37

Leave it to us to perform plastic mold and aluminum cast testing. We can primarily help you with functional auto parts and can handle both small lot production molding and mass production mold sales. ...

We can also handle aluminum test casting.

We can provide highly precise aluminum casting through our precision plaster casting. We handle post-treatment and post-processing. We can also handle plaster casting with the material ADC12.

Main 3 products Plastic mold (prototype / small lot production / mass production) manufacturing / molding  Precision plaster casting, precision sand casting  RP products / resin cutting products / cast articles
Type of manufacturing Transportation equipment  Not selected  Not selected
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

2:Development and production of prototype/Small-scale production - Prototype processing - Small-lot/Injection molding

3:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

4:Development and production of prototype/Small-scale production - Prototype processing - Plaster casting prototype

5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing

6:Development and production of prototype/Small-scale production - Prototype processing - Chassis prototype manufacturing

7:Development and production of prototype/Small-scale production - Prototype processing - Simplified/Molding

8:Development and production of prototype/Small-scale production - Prototype processing - Aluminum die-casting

9:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Hot plate welding

10:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Other bonding methods

71-80 / 20502 hits

New registration