81-90 / 4945 hits
Usage: Contact points for hand-held chargers Material: C1720-1 / 2H Plate thickness: 0.15 mm Progressive Die Minimize contact burr. Since 3 pieces are installed in parallel (using 3 pieces), the heights of the contact parts must be the same. Dimensional accuracy is required despite the complicated bending
| Main 3 products | Precision progressive die design and manufacture Precision stamping Various single-shot mold design and production |
|---|---|
| Type of manufacturing | Telecommunication equipment Electronic parts Medical equipment |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Progressive die 2:Mass production - Metal press - Progressive press (35 - 80 t) 3:Mass production - Metal press - Single press (below 80 t) 4:Designing - Mold designing - General metal press die 5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 6:Die manufacturing - Press die - Manufacturing 7:Die manufacturing - Press die - Designing 8:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining 9:Mass production - Metal press - Stainless steel 10:Mass production - Metal press - Thickness: below 0.2 mm |
Features of our resin reducer ・Contract, joint development ・Weight reduction Energy saving ・Maintenance-free Cost reduction ・Proposal of the optimum method (2K-H, 3K type, etc.) ■specification ・Method 3K type ・External φ70×L34 ・Reduction ratio 1/105 ・Output torque 15Nm ・Gear material ®K2520 ・Transmission efficiency about 70% * Back drive is possible ・ Backlash Approximately 20 arcmin ・ Weight about 200g (Carrier unit only) * Approximately 1/2 to 1/5 made of metal
| Main 3 products | Engine Mount (high GF material, robot), High performance friction linings Custom plastic sealing product. |
|---|---|
| Type of manufacturing | Office automation equipment Not selected Not selected |
| Recommended manufacturing category |
1:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 2:Product manufacturing - Production property - Stamp manufacturing 3:Product manufacturing - Plant equipment manufacturing - Steel and furnace apparatus manufacturing 4:Product manufacturing - Production property - Food industry machinery manufacturing 5:Designing - Industrial equipment designing - Industrial machinery designing 6:Designing - Industrial equipment designing - Automatic machinery manufacturing 7:Mass production - Plastic - Engineering plastic |
Use our ability to make proposals, procure materials and cope with quick delivery when you have no time to spare between testing and mass production! In particular, leave fine, narrow, small, thin and complex leaf springs to us. Example: thin: 0.03, small: rice grain size, narrow: diameter 0.5.
| Main 3 products | Precise progressive press die design and manufacturing. (Leaf springs, connector terminals, drawing processing) Mass press stamping (3 servo presses incl. 150 tons, 2 high-speed presses and 8 automatic presses) Trial processing by hand (can handle short delivery of 1 or more items) |
|---|---|
| Type of manufacturing | Telecommunication equipment Electronic parts Medical equipment |
| Recommended manufacturing category |
1:Parts manufacturing - Spring - Thin leaf spring 2:Mass production - Metal press - Stainless steel material for spring 3:Mass production - Metal press - Thickness: below 0.2 mm 4:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing 5:Die manufacturing - Spring mold - Leaf spring die 6:Designing - Mold designing - Progressive die designing (light electrical) 7:Designing - Mold designing - Drawing metal press die designing |
We provide a round-tip product by applying splitting (Warisaki) processing technology. ・To change the material shape from flat metal to round metal! ・To put the round shaped part to the flat metal directly! We can cope with a specially ordered product if the diameter of the round shape is within the dimension which can be put on the press. We constantly handle with the extending of the materials.
| Main 3 products | Welding and parts assembly Mold design and mfg Single press stamping |
|---|---|
| Type of manufacturing | Heavy electric machinery Transportation equipment Electrical component for transportation equipment |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Shaving die 2:Mass production - Metal press - Transfer press (200 - 500 t) 3:Mass production - Metal press - Progressive press (80 - 200 t) 4:Mass production - Metal press - Shaving 5:Mass production - Metal press - Transfer press (80 - 200 t) 6:Designing - Mold designing - Progressive die designing (auto) 7:Designing - Mold designing - Transfer press die designing 8:Die manufacturing - Press die - Transfer press die 9:Die manufacturing - Press die - Fine blanking die 10:Assembly/Inspection - Inspection - Metal press |
As a plastic magnet molding manufacturer, we produce distinctive, highly functional products. We manufacture motor parts, using both the two-color injection molding technology with plastic magnets and engineering plastics, and the integral injection molding technology including the shaft parts. In addition, our range of accurate multi-polarized magnet products, with a minimum magnetizing pitch of 40 μ, are used as sensors, motors, and meter magnets for rotary encoder magnets and linear encoder magnets.
| Main 3 products | Automotive control panels Plastic magnets Writing materials |
|---|---|
| Type of manufacturing | Electronic parts Electrical component for transportation equipment Stationery products |
| Recommended manufacturing category |
1:Mass production - Plastic - Plastic magnet molding 2:Mass production - Plastic - Dual molding 3:Mass production - Plastic - Injection molding 4:Mass production - Plastic - Thin wall molding 5:Designing - Mold designing - Injection molding die 6:Die manufacturing - Plastic mold - Manufacturing 7:Die manufacturing - Plastic mold - Part processing |
TOHOKU SOLUTIONS Co., Ltd. is electronic manufacturing with moreover 25 years of experience. Our company ready to be an EMS services provider with human resources, operator training system, production area, quality control system as well as design assembly process and engineering team support all the time. Our company has an in-house production for metal parts and plastic injection In order to provide the most satisfying price for customers. TOHOKU SOLUTIONS Co., Ltd. 1/50 Moo 5, Rojana Industrial Park, T. Khanham, U-thai, Ayutthaya 13210 Tel: +-66-35-330-990 Mr. Umetsu (JP): yasushi.umetsu@tohokusolutions.com Mr. Kanungdate (TH): kanungdate.Jaroenchaisombut@tohokusolutions.com
| Main 3 products | Mechanism and OPU for Car audio, HUD, EMS Assembly product Stamping Press part and Plastic Injection part Factory Automation System |
|---|---|
| Type of manufacturing | Home electrical appliances Audio-video equipment Not selected |
| Recommended manufacturing category |
1:Mass production - Plastic - Injection molding 2:Mass production - Metal press - Progressive press (80 - 200 t) 3:Product manufacturing - Production property - Optical products manufacturing 4:Auto parts manufacturing - Interior part - Audio components 5:Designing - Industrial equipment designing - Automatic machinery manufacturing |
| Main 3 products | Plastic mold sales, design, manufacture Industrial precision plastic parts |
|---|---|
| Type of manufacturing | Home electrical appliances Office automation equipment Electrical component for transportation equipment |
| Recommended manufacturing category |
1:Mass production - Plastic - Engineering plastic 2:Mass production - Plastic - Injection molding 3:Die manufacturing - Plastic mold - Injection molding die 4:Mass production - Plastic - Insert molding 5:Die manufacturing - Plastic mold - Insert molding die 6:Designing - Data creation (3D scan) - 3D printer 7:Mass production - Plastic - 300 - 1,000 t 8:Die manufacturing - Plastic mold - 60 - 300 t 9:Designing - Data creation (3D scan) - Data creation (3D scan) 10:Assembly/Inspection - Inspection - Plastic |
[Electrode production] Production of high-precision, high-difficulty electrodes [Material] tough pitch copper Oxygen-free copper The rigidity will increase if rolled. [Processing] We use high-precision machining with linear drive [Feature] Excellent electrode processing is essential to perform "pika discharge" (polishless/without polish) in die-sinker EDM. Yoshida Kanagata Kogyo Co., Ltd. 1-589, Bouzuyama, Yokone-cho, Oubu-shi, Aichi 474-0011 TEL: +81-562-48-3456 FAX: +81-562-46-1135 Person in charge: Katsuhisa Yoshida
| Main 3 products | Die casting mold design and production Various mold parts production Various mold maintenance |
|---|---|
| Type of manufacturing | Jigs and tools Industrial machinery Transportation equipment |
| Recommended manufacturing category |
1:Die manufacturing - Casting die - Die-casting die 2:Die manufacturing - Casting die - Designing 3:Die manufacturing - Casting die - Manufacturing 4:Assembly/Inspection - Repair - Die repair 5:Die manufacturing - Casting die - Die-casting part processing 6:Designing - Data creation (3D scan) - Data creation (3D scan) 7:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 8:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 9:Die manufacturing - Casting die - 3D modeling 10:Designing - Mold designing - Casting die designing |
Aluminum die casting [Automotive parts, 2-wheel parts, general parts and office machine parts, etc.] ◆ Features The most commonly used die casting is aluminum alloy. This light and strong alloy has excellent corrosion resistant properties and is widely used in applications for various fields. ◆ Iwaki Diecast’s aluminum die casting production system We use a launder system, which enables us to always supply clean raw materials, when feeding the molten metal from the melting furnace to the holding furnace. The scrap material, which is generated during trimming, is returned to the melting furnace via an underground conveyor. Our casting equipment is automated featuring a unique manufacturing method that is both highly productive and very safe. It produces a smooth surface with a minimal number of blowholes. ◆ Melting process • Our melting is centralized with high thermal efficiency. • The molten metal is poured into the holding furnace using launders (troughs) and porters. • We supply clean molten metal with minimal temperature difference by using an electric furnace. ◆ Casting process • Our own automated and systematized facilities enable us to automate processes up to the separation of gates. • Our die temperature control enables us to make products of consistent quality. • Our management system CAMOS allows us to visually monitor the production status. ◆ Main usages Automotive parts, 2-wheel parts, general parts and office machine parts, etc.
| Main 3 products | Aluminum and zinc die cast products Ultra-high speed and precise zinc die cast products using special die casting constructions Iron and stainless steel injection molded parts…MIM (Metal Injection Molding) |
|---|---|
| Type of manufacturing | Not selected |
| Recommended manufacturing category |
1:Mass production - Plastic - Metal injection molding (MIM) 2:Mass production - Casting - Metal injection molding (MIM) 4:Mass production - Die-casting - Aluminum 5:Mass production - Casting - Cast steel 6:Designing - Mold designing - Casting die designing 7:Surface treatment - Plating/Chemical conversion treatment - Zinc die-cast 8:Die manufacturing - Casting die - 3D modeling 9:Mass production - Die-casting - 125 t or less 10:Mass production - Die-casting - 125 - 250 t |
This communication system chassis is processed using SQ material and assembled with rivets. ・Size: D250mm x W350mm x H200mm ・Number of lots: 1 to 100 pieces ・Processing method: Laser combination machine *3D data is required. (STEP) （Features） This is a difficult to make product. The work is light since it is held together by rivets, but if the individual pieces are not exact, the holes will not match, and assembly will be impossible. ******************************************** TAKEMURA Co., Ltd. TEL +8142-378-3851 FAX +8142-377-8600 Website ： http://www.takemura-tokyo.co.jp Person in contact： Kimihiro Shigezawa *********************************************
| Main 3 products | Precision sheet metal Design (structure) Assembly |
|---|---|
| Type of manufacturing | Office automation equipment Telecommunication equipment Medical equipment |
| Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - Sheet-metal processing - Precision sheet metal machining 2:Development and production of prototype/Small-scale production - Blank cutting - Laser and turret punch press processing 3:Development and production of prototype/Small-scale production - Sheet-metal processing - Bending (hydraulic) 4:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Spot welding 5:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Stud welding 6:Designing - Product and part designing - Measurement/testing device designing 7:Assembly/Inspection - Assembly - Precision equipment assembly |
81-90 / 4945 hits
