1-10 / 1726 hits
In-house design and production of precision press die&mold. Die&mold procurement from our overseas bases is also possible with reasonable cost. Mizuho Spring Seisakusho Co., Ltd. 5-80 Urasato, Midori-ku, Nagoya shi TEL 052-624-2031 FAX 052-621-2291
| Main 3 products | Metal press and precision spring manufacturing Temporary staffing, recruitment and business consignment Precision press die manufacturing and sales |
|---|---|
| Type of manufacturing | Transportation equipment Office appliances Office automation equipment |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Part processing 2:Die manufacturing - Press die - Progressive die 3:Die manufacturing - Press die - Single press die 4:Die manufacturing - Press die - 60 - 300 t 5:Parts manufacturing - Spring - Compression coil spring 6:Parts manufacturing - Spring - Piano wire (carbon wire) 7:Parts manufacturing - Spring - Formed wire spring |
[Machined SUS316L 3D shape, surface roughness, chemical/medical business] 【Material】 SUS316L 【Dimension】 Outer diameter φ95 【Lot】 1 to 100 pieces 【Precision】 ±0.05㎜ 【Processing method】 Machining, wire cut 【Industry/Application】 Chemical, semiconductor, medical business related 【Features】 This is a stainless steel precision item made of SUS316L that is used in the chemical and pharmaceutical industries. SUS316L clearly has inferior machinability when compared to SUS304. We chose and prepared a knife suited for SUS316L processing. As shown in the photo, the product has a round form, but through trial and error in setup and construction methods, we were able to finish it virtually entirely by machining. The slope at the top of the photo is where the liquid flows, so a severe surface roughness is required. Using optimal cutting tools and processing conditions, we are able to create a high surface roughness even when liquids flow through it. We carefully examine the blades and processing conditions used depending on the material and processing content, and strive to provide our customers with high-quality products in short delivery times. ☆Shimizu Trym Precision Inc., a manufacturer of precision parts and precision molds☆ 421-1 Shinden Nagasaki, Shimizu-ku, Shizuoka-shi, Shizuoka TEL：+8154-340-6631 FAX：+8154-340-5571 mail：eigyo@shimizutrym-pc.co.jp http://www.shimizutrym.co.jp/ We process anything from mold parts to industrial parts, precision parts, and ultra-precision parts regardless of material! by Nobita
| Main 3 products | Press mold parts Various metal/non-metal parts Semiconductor parts |
|---|---|
| Type of manufacturing | Measuring machinery Industrial machinery Electronic parts |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Manufacturing 2:Die manufacturing - Press die - Blanking die 3:Designing - Jig and tool designing - Mass production jig designing 4:Development and production of prototype/Small-scale production - Jig manufacturing - Mass production jig manufacturing 5:Parts manufacturing - Other parts - Blade manufacturing 6:Development and production of prototype/Small-scale production - Sheet-metal processing - Can manufacturing 7:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 8:Surface treatment - Polishing/Lapping - Mirror polishing 9:Assembly/Inspection - Assembly - Auto parts assembly 10:Designing - Jig and tool designing - General jig designing |
This is a pallet made from recycled materials of containers and packaging. We do product design and mold production. Type Size Weight Both sides 1100×1100×150 35 kg One side 1100 x 1100 x 150 34 kg, hand lift possible Both sides (light weight) 1100×1100×150 26 kg One side (light weight) 1100×1100×150 25 kg, hand lift possible Both sides (light weight) 1400 x 1100 x 140 34 kg Movable load: 1t (Dynamic load) ・ 3t (Static load) We also do sales. Please feel free to contact us for product design, mold production, manufacturing and sales of various pallets.
| Main 3 products | Automotive interior press die, dedicated machine for surface pressure tightening KP sheet, kenaf, deck, KPla sheet Recycling pallets, variable pallets, plastic floor board, pliers |
|---|---|
| Type of manufacturing | Not selected Not selected Not selected |
| Recommended manufacturing category |
1:Designing - Mold designing - General metal press die 2:Die manufacturing - Press die - Manufacturing 3:Die manufacturing - Press die - Blanking die 4:Die manufacturing - Press die - Designing 5:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding 6:Mass production - Welding / welding - TIG welding (argon welding) 7:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing |
| Main 3 products | Metal Product Forming for Hard Disk Electronic Automotive |
|---|---|
| Type of manufacturing | Home electrical appliances Office automation equipment Electronic parts |
| Recommended manufacturing category |
1:Die manufacturing - Press die - 60 - 300 t 2:Surface treatment - Heat treatment - Vacuum quenching 3:Die manufacturing - Press die - Manufacturing |
Realized cost reduction by changing the producing method. We have changed the method from sheet metal processing to press processing. Material: A1100 Size: w32.5 x L133.0 x H106.2 Thickness: t1.5 After pressing, it was anodized.
| Main 3 products | Loom machine parts Mold design/manufacturing and press processing Machine tool parts: die design/manufacturing and press processing Proposal pressing instead of machining |
|---|---|
| Type of manufacturing | Machine tools Industrial machinery Electronic parts |
| Recommended manufacturing category |
1:Mass production - Metal press - Thickness: 3.2 - 9.0 mm 2:Die manufacturing - Press die - Progressive die 3:Die manufacturing - Press die - Single press die 4:Mass production - Metal press - Progressive press (80 - 200 t) 5:Mass production - Metal press - Single press (80 - 200 t) 6:Mass production - Metal press - Iron 7:Mass production - Metal press - Stainless steel |
Usage: Contact points for hand-held chargers Material: C1720-1 / 2H Plate thickness: 0.15 mm Progressive Die Minimize contact burr. Since 3 pieces are installed in parallel (using 3 pieces), the heights of the contact parts must be the same. Dimensional accuracy is required despite the complicated bending
| Main 3 products | Precision progressive die design and manufacture Precision stamping Various single-shot mold design and production |
|---|---|
| Type of manufacturing | Telecommunication equipment Electronic parts Medical equipment |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Progressive die 2:Mass production - Metal press - Progressive press (35 - 80 t) 3:Mass production - Metal press - Single press (below 80 t) 4:Designing - Mold designing - General metal press die 5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining 6:Die manufacturing - Press die - Manufacturing 7:Die manufacturing - Press die - Designing 8:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining 9:Mass production - Metal press - Stainless steel 10:Mass production - Metal press - Thickness: below 0.2 mm |
We provide a round-tip product by applying splitting (Warisaki) processing technology. ・To change the material shape from flat metal to round metal! ・To put the round shaped part to the flat metal directly! We can cope with a specially ordered product if the diameter of the round shape is within the dimension which can be put on the press. We constantly handle with the extending of the materials.
| Main 3 products | Welding and parts assembly Mold design and mfg Single press stamping |
|---|---|
| Type of manufacturing | Heavy electric machinery Transportation equipment Electrical component for transportation equipment |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Shaving die 2:Mass production - Metal press - Transfer press (200 - 500 t) 3:Mass production - Metal press - Progressive press (80 - 200 t) 4:Mass production - Metal press - Shaving 5:Mass production - Metal press - Transfer press (80 - 200 t) 6:Designing - Mold designing - Progressive die designing (auto) 7:Designing - Mold designing - Transfer press die designing 8:Die manufacturing - Press die - Transfer press die 9:Die manufacturing - Press die - Fine blanking die 10:Assembly/Inspection - Inspection - Metal press |
Stress-free shooting feeling We have developed a world’s smallest ultra precision stamping die handheld punch. *Visually check for punching positions is possible. *Longevity of sharpness With the smallest clearance of less than 0.005mm, outstanding sharpness lasts for a long time. In addition, It can be used on metallic foils that are difficult to process with ordinary hand punches without burrs, deformation, and appearance of foreign substances. *Light weight and compact size It is designed to be light weight and compact which can easily handled by females. It is possible to punch with applying less force, resulting in the increase of operational efficiency! Shock resistant design The jamming doesn’t appear even if it is dropped unintentionally. *Less foreign substances intervention will occur due to use of this product. We have 4 kinds of standard sizes! We also have 7 different colors, allowing you to apply them to recognize different manufacturing processes and shapes. It’s possible to add convenient options. Please send us documents with required measurements. For more details, please check our web site.
| Main 3 products | Design and production of ultra precision jigs Design and production of precision stamping dies, and production of precision stamping parts Production of precision machine parts and precision stamping die parts |
|---|---|
| Type of manufacturing | Jigs and tools Industrial machinery Not selected |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Blanking die 2:Parts manufacturing - Other parts - Blade manufacturing 3:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing 4:Mass production - Metal press - Combined press-joining 5:Product manufacturing - Medical equipment manufacturing - Medical equipment manufacturing 6:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing 7:Mass production - Grinding processing - Plane grinding 8:Surface treatment - Polishing/Lapping - Mirror polishing 9:Designing - Jig and tool designing - General jig designing 10:Die manufacturing - Cutting dies - Thomson punch |
| Main 3 products | Caulking press Flat spring parts Press/die manufacturing |
|---|---|
| Type of manufacturing | Home electrical appliances Telecommunication equipment Electronic parts |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Progressive die 2:Mass production - Metal press - Thickness: 0.2 mm - 3.2mm 3:Mass production - Metal press - Combined press-joining 4:Mass production - Metal press - Thickness: below 0.2 mm 5:Mass production - Metal press - Progressive press (35 - 80 t) 6:Mass production - Metal press - Copper 7:Mass production - Metal press - Phosphor bronze 8:Mass production - Metal press - Brass 9:Mass production - Metal press - Stainless steel 10:Designing - Mold designing - General metal press die |
NAOYA HIDA & Co.は、飛田直哉氏が手がける時計ブランドです。 熟練職人による手作業と最新鋭工作機械による加工を組み合わせた現代のヴィンテージ ウォッチ 協栄プリント技研株式会社では、独自の技術で、デザインを忠実に切削加工をした 時針、分針、秒針を提供しております。
| Main 3 products | Precision press dies [Design, manufacture and sales] Micro-manufactured parts ［Manufacture and sales］ |
|---|---|
| Type of manufacturing | Jigs and tools Telecommunication equipment Electronic parts |
| Recommended manufacturing category |
1:Die manufacturing - Press die - Blanking die 2:Development and production of prototype/Small-scale production - Machining - Handles microfabrication 3:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 4:Die manufacturing - Cutting dies - Cutting blade cutting die 5:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece) 6:Die manufacturing - Rubber mold - Light electrical/earthing rubber 7:Die manufacturing - Press die - Fine blanking die |
1-10 / 1726 hits
