51-60 / 2793 hits

51.

Mizui Seiko Co., Ltd. Location:  Ibaraki  Hitachiota City 825, Orihashi-cho Employees 49

Achieves high-precision machining by combining fine cutting technology of φ0.3 ~ withsubmicron precision polishing and grinding technology It requires many technologies such as cutting, polishing, ...

SUJ2 Cylindrical roller

■ SUJ2 cylindrical roller with outer diameter accuracy of 1 micron In-house integrated production of cutting, polishing, grinding, heat treatment, surface treatment, and assembly processing. SUJ2 (high carbon chrome steel) SUS in general (SUS440C SUS304) ● Needle-shaped roller, knock pin, dowel pin, grooved pin ● Cylindrical roller, crowning roller, needle pin ● Precision shaft (Φ0.1 ~) Motor shaft, small diameter pin Specifications for rotating and linear precision rolling elements For bearings, linear guides, reduction gears, index tables

Main 3 products Manufacture of precision shafts, small diameter pins, positioning pins, needle pins  Cylindrical roller, needle roller, crowning roller, rod roller  High precision shaft / mirror surface shaft
Type of manufacturing Electrical component for transportation equipment  Industrial machinery  Medical equipment
Recommended manufacturing category

1:Parts manufacturing - Machinery part - Shaft and roller manufacturing

2:Mass production - Grinding processing - Centerless grinding

3:Mass production - Mechanical processing - Fine particle material accepted

4:Surface treatment - Polishing/Lapping - Mirror polishing

5:Mass production - Mechanical processing - Automatic screw machining

6:Mass production - Mechanical processing - High precision

52.

TOSHIN CO.,LTD. Location:  Aichi  Oguchi-cho, Niwa-gun 2-287 Nakaoguchi Employees 25

"We manufacture hot forging brass and NC lathe precision machining products in Aichi prefecture. Although it is a company with about 30 employees, it has been engaged in the copper products industry f...

[Improvement example] For household equipment manufacturers (faucet parts): Quality and work efficiency improvement, cost reduction by integral molding of hot forging

"◆ Issues We used to manufacture parts only by cutting, but we thought to find a method that yield stronger products and less costly. ◆ Our suggestion We offered to including forging in the process that is normally performed only by cutting which lead to quality improvement and cost reduction. ◆ Improvement results ① A boost in strength The brass rod used for forging has a very high viscosity, which led to an increase in strength. ② Work efficiency improvement by reducing man-hours Compared to hot forging, processing such as ""making a hexagonal shape"" and ""pulling out"" can be performed at once, so parts to be cut has decreased. ③ Cost reduction Since the material used for hot forging is smaller compared to cutting, the total material cost has been reduced by 50%."

Main 3 products Brass forging and cutting products  Household equipment parts (gas equipment parts, faucet fitting parts, various fittings)  Automobile parts / electrical parts / electric power parts
Type of manufacturing Industrial machinery  Electronic parts  Electrical component for transportation equipment
Recommended manufacturing category

1:Mass production - Forging - Hot forging

2:Mass production - Forging - Brass

3:Parts manufacturing - Machinery part - Connection parts manufacturing

4:Mass production - Mechanical processing - Complex turning machining

5:Mass production - Mechanical processing - Copper alloy

6:Surface treatment - Plating/Chemical conversion treatment - Nickel chromium (rack)

7:Parts manufacturing - Machinery part - Valve manufacturing

53.

ARIKAWA WORKS INC. Location:  Ishikawa  Kanazawa City Building 2F, 1-8-3 Kitayasue Employees 29

Our company designs and manufactures molds and processes pressed products. We manufacture all kinds of industrial machine parts such as textile machine parts, electronic parts manufacturing machine pa...

Aluminum processing, alumite processing, unit cover, thickness 1.5

Realized cost reduction by changing the producing method. We have changed the method from sheet metal processing to press processing. Material: A1100 Size: w32.5 x L133.0 x H106.2 Thickness: t1.5 After pressing, it was anodized.

Main 3 products Loom machine parts Mold design/manufacturing and press processing  Machine tool parts: die design/manufacturing and press processing  Proposal pressing instead of machining
Type of manufacturing Industrial machinery  Machine tools  Electronic parts
Recommended manufacturing category

1:Mass production - Metal press - Thickness: 3.2 - 9.0 mm

2:Die manufacturing - Press die - Progressive die

3:Die manufacturing - Press die - Single press die

4:Mass production - Metal press - Progressive press (80 - 200 t)

5:Mass production - Metal press - Single press (80 - 200 t)

6:Mass production - Metal press - Iron

7:Mass production - Metal press - Stainless steel

54.

Soltec Co., Ltd. Location:  Aomori  Minamitsugaru-gun 46-2 Kawabekamifunahashi Inakadate-mura Employees 23

"Saltec has been manufacturing precision mold parts and molds for plastic injection molding since 1989 in Inakadate Village, Aomori Prefecture. Molds are from 3D design to built-in Try, and precision ...

" Character engraving example by electric discharge machining: Convex character discharge of identification mark"

"<Example of character engraving by electric discharge machining: Convex character discharge of JIS display mark> This is an example of the convex character discharge of the JIS display mark on the pin tip surface of high-speed tool steel SKH51 (high-speed steel). In this case, the character design of ""JIS"" was finished to a size of Φ0.5 mm around the mark engraved part. Regarding electric discharge machining as in this case, Saltec can perform consistent machining from electrode creation to engraving. <From general-purpose symbols and marks to customer-specific logos and brand designs> Regarding the engraving process of characters, Saltec can handle not only general identification signs and symbols such as JIS mark and recycling symbol, but also original designs such as logo mark, brand design and company emblem designed by the customer. Not only when the design mark data is prepared by the customer, but also for the design that has not been converted into data. We will respond from the data creation based on close discussion with the customer. If you have any problems with engraving such as identification mark, logo mark, brand design, company emblem, etc., please contact us. Saltec Co., Ltd. 46-2 Kamifunahashi, Inakadate-mura, Minamitsugaru-gun, Aomori Prefecture TEL: 0172-58-2281 mail: scad@saltec.co.jp"

Main 3 products Fine engraving  Mold parts  Mold design, production, processing
Type of manufacturing Electronic parts  Jigs and tools  Not selected
Recommended manufacturing category

1:Surface treatment - Printing and others - Engraving

2:Development and production of prototype/Small-scale production - Machining - High rigid material

3:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

4:Die manufacturing - Plastic mold - Part processing

5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

6:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining

55.

Yashima Kobayashi Industry Co.,Ltd Location:  Akita  Yurihonjo City 429 Okikoda, Yashimamachi Jonai Employees 350

~ ★ Labor saving / rationalization Machine parts processing / Manufacturing of various jigs and tools ★ ~ ~ ● Processing of magnetic material products, processing of various fine ceramics and speci...

Ferrite material processing with a vertical processing machine (both soft and hard are accepted)

Ferrite shape processing (M2 + O ・ Fe203) ◆ Material ◆ ・ Soft ferrite ・ Hard ferrite ◆ Usage ◆ ・ Electrical parts ・ Home appliances ・ In-vehicle parts ◆ Dimensions ◆ It is possible to process to the micron unit. ◆ Processing method ◆ ・ Vertical processing machine ・ Surface grinding processing ・ Machining ・ Outer circumference slicer ・ Inner circumference slicer We will handle everything from material cutting, processing to inspection. We manufacture our own original jigs and tools and process various shapes to meet the needs of our customers. If you have a request for processing, please contact us. Yashima Kobayashi Industry Co., Ltd. Headquarters Factory 〒015-0411 429 Okikoda, Yashimamachi Jonai, Yurihonjo City, Akita Prefecture TEL: 0184-56-2637 FAX: 0184-56-2779 Person in charge : Naoko Tsuchida

Main 3 products Processing of magnetic materials and processing of ceramics  Labor saving / rationalization Machine parts manufacturing and various jigs and tools  Development and design of medical device related equipment
Type of manufacturing Electronic parts  Industrial machinery  Machine tools
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Stainless steel

2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

3:Development and production of prototype/Small-scale production - NC machining - Machining (horizontal)

4:Mass production - Mechanical processing - NC turning machining

5:Mass production - Mechanical processing - Ceramic

6:Surface treatment - Polishing/Lapping - Dual-face lapping and polishing

7:Surface treatment - Polishing/Lapping - Lap mirror polishing

56.

Hanno Precision .Co.,Ltd Location:  Saitama  Hanno City 783 Ashikariba Employees 24

Mold manufacturing, press processing, and assembly of communication equipment, speed reducers, crystal transmitter, medical equipment, watch parts, semiconductors, electronic parts, and all other prec...

Hand scanner stationary charger contacts

Usage: Contact points for hand-held chargers Material: C1720-1 / 2H Plate thickness: 0.15 mm Progressive Die Minimize contact burr. Since 3 pieces are installed in parallel (using 3 pieces), the heights of the contact parts must be the same. Dimensional accuracy is required despite the complicated bending

Main 3 products Precision progressive die design and manufacture  Precision stamping  Various single-shot mold design and production
Type of manufacturing Telecommunication equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Die manufacturing - Press die - Progressive die

2:Mass production - Metal press - Progressive press (35 - 80 t)

3:Mass production - Metal press - Single press (below 80 t)

4:Designing - Mold designing - General metal press die

5:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

6:Die manufacturing - Press die - Manufacturing

7:Die manufacturing - Press die - Designing

8:Development and production of prototype/Small-scale production - Electrical discharge machine - Micro hole machining

9:Mass production - Metal press - Stainless steel

10:Mass production - Metal press - Thickness: below 0.2 mm

57.

Ishigaki Syoten Inc. Location:  Aichi  Nagoya City Moriyama-ku Employees 22

Ishigaki Syoten is a copper metal processing company located in Nagoya, Aichi Prefecture. The processing technology includes cutting of precision parts and high precision sheet metal press. We accept ...

[Material] Copper busbar, copper rod, copper strip [Processing technology] bending, twisting, welding, cutting. We made an amusement park!

[Material] Copper busbar, copper rod, copper strip [Processing technology] bending, twisting, welding, cutting. We made an amusement park! [Material] C1100 (c1100) [Industry/Uses] Copper and aluminum product manufacturing related industries Transformers, control panels, switchboards in heavy electrical industry [Material size] Thickness 8 mm x width 20 mm x length 600 mm [Processing machine] Bender processing, press processing, welding processing [Feature] This is a ferris wheel made from C1100 (c1100). It is our company monument that fully uses its own processing capabilities. Beautiful even when its bent and good at scratch, surface treatment. Our main business is using copper bus bars and copper rods to manufacture transformers and control panel parts for the power equipment industry. Please contact us for precision copper parts machining. You may find information of precision machining technology and copper precision parts on our website. Please refer to the detailed explanation. Ishigaki Syoten Inc. 1-629 Seko, Moriyama Ward, Nagoya City, Aichi Prefecture 463-0068 TEL 052-793-3080 FAX 052-793-1079 E-mail:info@ishigaki-st.com Person in charge: Ishigaki

Main 3 products Copper bus bar, Copper bar processing, Precision machining  Transformer parts  Switchboard, control panel parts
Type of manufacturing Heavy electric machinery  Transportation equipment  Industrial machinery
Recommended manufacturing category

1:Mass production - Metal press - Copper

2:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

3:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

4:Mass production - Mechanical processing - Machining

5:Development and production of prototype/Small-scale production - Prototype processing - Bending

6:Mass production - Mechanical processing - Complex turning machining

7:Mass production - Mechanical processing - High precision

58.

Sawatetsu Co. ltd Location:  Aichi  Hekinan City 5-25 Suma-cho Employees 37

Since our establishment, we have been involved in mold design and manufacturing mainly in the ceramic industry, and now we are engaged in manufacturing parts, jigs and molds for the aerospace and auto...

[Quick delivery, aluminum (A5052), 5-axis machine, total cutting, shaving]

[Quick delivery, aluminum (A5052), 5-axis machine, total cutting, shaving] [Material] Aluminum (A5052) [Industry] Transportation equipment manufacturers [Accuracy] Geometric tolerance exist [Lot] 1-2 pieces/month [Processing method] Machining [Lead time] About 7 days *Depends on process situation [Feature] It is a part processing that requires multiple setups. We think what is best to process and what kind of distortion can be considered. This is a project that was fully processed using a 5-axis machine. We will make complex shapes with total cutting. Please feel free to contact us if you have any problems. Sawatetsu Co., Ltd. Address: 5-25 Suma Town, Hekinan City, Aichi Prefecture TEL: 0566-48-4831 FAX: 0566-48-5037 E-mail: office@sawatetsu.com Website: http://www.sawatetsu.com Person in charge: Ginnan

Main 3 products Parts processing for various products  Prototype single item processing  Can manufacturing, sheet metal, various surface treatments, assembly
Type of manufacturing Industrial machinery  Measuring machinery  Transportation equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

2:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

3:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

4:Mass production - Plastic - CFRP (carbon fiber reinforced plastic)

5:Mass production - Mechanical processing - High precision

6:Development and production of prototype/Small-scale production - Machining - Gear hobber

7:Development and production of prototype/Small-scale production - Machining - Thread-cutting

8:Assembly/Inspection - Assembly - Industrial machinery assembly

9:Development and production of prototype/Small-scale production - Machining - Casting

10:Assembly/Inspection - Inspection - Measuring

59.

Riban Ishikawa Corporation Location:  Toyama  Nanto City 62 Kunihiro Employees 29

Riban Ishikawa mainly manufactures plastic molds, press molds, and die casting molds. We are good at workpieces with a size of 300 to 900 mm square, and capable of high-speed and high-precision machin...

[Insert molding/Core pin] SKD61 (steel/die steel) High precision machining of high hardness material

This is SKD61 (alloy tool steel, steel and die steel) mold parts. Please contact us for insert molding and core pins. ◇ Product details Product name: Mold parts Industry: Automotive Material: SKD61 Size: 25×20×110mm Processing classification: Cutting Processing machine: D500 (Makino) ◇PR We proces not only mold parts, but also high-precision parts from prototypes. We have a high-speed 5-axis control machining center and other high-performance processing machines, and work on high-speed, precision, multi-axis processing technology rapidly. We provide high-quality parts such as machining centers, wire cuts, electric discharge machines, and coordinate measuring machines. Main industries: Design and manufacture of plastic (resin) molds, die casting mold parts processing, aircraft parts processing, etc. ◇Corporate information Riban Ishikawa Corporation 939-1846 62 Kunihiro, Nanto City, Toyama Prefecture TEL: 0763-62-1783 FAX:0763-62-2502 Home page: http://www.riban.co.jp/index.html

Main 3 products Plastic mold parts processing (automobile parts)  Die casting mold parts processing (automobile parts)  Jig&tool/precision machine parts processing
Type of manufacturing Transportation equipment  Office automation equipment  Home electrical appliances
Recommended manufacturing category

1:Die manufacturing - Casting die - Die-casting part processing

2:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

3:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

4:Development and production of prototype/Small-scale production - Electrical discharge machine - Wire electric discharge machining

5:Die manufacturing - Plastic mold - Plate machining

6:Development and production of prototype/Small-scale production - Machining - Simultaneous 5-axis machining

7:Development and production of prototype/Small-scale production - Machining - Machining/Handles small-scale production (order from 1 piece)

60.

T-Hoden Tech.Co.,Ltd Location:  Miyagi  Osaki City 39-2 Aoyama, Sanbongisakamoto Employees 13

Located in Osaki City, Miyagi Prefecture, we specialize in manufacturing various mold parts, parts for automatic machines and special-purpose machines, jigs and tools, and electrodes for die-sinking E...

Precision jig&tool parts manufacturing

[Precision jig and tool parts manufacturing] This is a production example of precision jigs and tools. We have many achievements in machining with external dimensions of about 300 sq mm. We are also good at using both machining centers for machining and electric discharge machining for wire cutting, depending on the material, shape, delivery date and cost. We accept wide variety from single items, small lots to medium lots. Please feel free to contact us anytime. <External dimensions> 23mm x 25mm x 27mm <Materials we can handle> S45C, S50C, NAK55, NAK80, SKD11, PD613, SUS440C, SKH51, Various cemented carbide materials, etc.

Main 3 products Manufacture of various mold parts, parts for automatic machines and special-purpose machines, jigs and tools, and electrodes for die-sinking EDM  Die-sinking EDM, wire cut EDM, small hole EDM, machining, NC milling, milling, forming grinding, surface grinding  Iron, stainless steel, aluminum, copper, carbide, tungsten, titanium, inconel, conductive ceramic, etc.
Type of manufacturing Audio-video equipment  Telecommunication equipment  Electronic parts
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Electrical discharge machine - Electric discharge machining

51-60 / 2793 hits

New registration