31-40 / 2793 hits

31.

NANSHIN CO.,LTD. Location:  Nagano  Iijima-machi, Kamiina-gun 739 Iijima Employees 98

We handle development, manufacturing, and sales of ultra precise micro tubes that employ electroforming technology. While maintaining high precision, we are also able to manufacture fine-hole and long...

Micropipe

Nanshin Micropipe is customizable in OD/ID and length. Gold plating is also available for both inner and outer surface. Please refer to the technical brochure and visit out website for more details.

Main 3 products Ultra precision micro tube (fine metal pipe)   Metal workpieces ・jigs and tools  Outsourced assembly
Type of manufacturing Electronic parts  Telecommunication equipment  Medical equipment
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

2:Development and production of prototype/Small-scale production - Blank cutting - Precision cutting

3:Development and production of prototype/Small-scale production - Blank cutting - Nitrogen cutting

4:Development and production of prototype/Small-scale production - Blank cutting - Thin plate (below 6 mm)

5:Designing - Simulation - Casting

6:Designing - Simulation - Plating

7:Development and production of prototype/Small-scale production - Blank cutting - Cutting

8:Development and production of prototype/Small-scale production - Machining - Deep hole drilling

9:Designing - Simulation - Cutting

10:Assembly/Inspection - Assembly - Precision equipment assembly

32.

Plamoul Seiko Co.,Ltd. Location:  Miyagi  Kurokawa-gun Tomitani-chou Takanosha 4-3-5 Employees 42

“The Degassing Revolution: Unbelievable Degassing. Better Quality and Reduced Cost.” Have you ever faced with a problem during conservation of injection moulds and/or cast moulds due to poor degass...

“Gas-tosu” (Registered trade name), Ejector-Pin, Core-Pin with gas-venting function

“Gas-tosu,” Ejector-Pin, Core-Pin with gas-venting function "Gas-tosu" is a registered trade name. "tosu" is a Japanese word, and it means making something pass. Therefore, "Gas-tosu" is the tool which makes gas pass. ◆The features of Gas-tosu Gas-tosu is used as Ejector-pin or Core-pin with gas-venting (air-venting) function. The vent width in Gas-tosu can be selected from 0.005~0.05mm according to the fluidity of resin. Therefore, Gas-tosu is acceptable to every kinds of resin. The inclined-processing is being performed into Gas-tosu to efficiently exhaust the gas which occurs in die. Installing the gas vent with the width which is 0.005~0.05mm is possible according to the fluidity of resin.

Main 3 products Spool, Runner parts, ejector pin for electronic products  Core pin, Precision Moulds  Mould parts, Connector for electronic parts
Type of manufacturing Jigs and tools  Electronic parts  Not selected
Recommended manufacturing category

1:Die manufacturing - Plastic mold - Part processing

2:Die manufacturing - Plastic mold - Designing

3:Die manufacturing - Plastic mold - Manufacturing

4:Designing - Mold designing - Injection molding die

5:Die manufacturing - Plastic mold - Injection molding die

6:Material - Plastic material distribution - ABS resin

7:Material - Plastic material distribution - PP (polypropylene)

8:Material - Plastic material distribution - PC (polycarbonate)

9:Material - Plastic material distribution - POM (polyoxymethylene)

10:Die manufacturing - Plastic mold - Thermoset resin die

33.

Ito Seisakusho Co., Ltd. Location:  Mie  Yokkaichi 101 Hironaga-cho Employees 102

Since our company was established, we have developed our business as a pioneer in progressive mold design and manufacture and press parts processing for automobile parts. 95% of our products are autom...

20% plate thickness drilling and hole machining

Material: SPH270C / Plate thickness: 6.0 mm / Hole diameter: 1.2. We can perform drilling with press stamping. By putting them inside progressive molds, we can drastically reduce costs. Special Characteristics 1. Production with hole machining precision of plus/minus 0.01 mm made possible 2. Shear surface length 80% or more 3. As for burrs, fracture surface molding nearly like burr removal of the same chamfer surface Material: SPHC Plate Thickness: 6.0 mm Hole Diameter: 1.2

Main 3 products Progressive mold designing  Progressive mold manufacturing  Progressive press stamping / cold forging
Type of manufacturing Transportation equipment  Electronic parts  Office automation equipment
Recommended manufacturing category

1:Mass production - Metal press - Progressive press (200 - 500 t)

2:Designing - Mold designing - Progressive die designing (auto)

3:Die manufacturing - Press die - Progressive die

4:Designing - Mold designing - Progressive die designing (light electrical)

5:Die manufacturing - Press die - Blanking die

6:Designing - Mold designing - NC data creation (press)

7:Mass production - Metal press - Progressive press (80 - 200 t)

8:Mass production - Metal press - Progressive press (35 - 80 t)

9:Die manufacturing - Press die - Die set machining

10:Designing - Mold designing - General metal press die

34.

NOGAMIGIKEN CO., LTD. Location:  Ibaraki  Hitachiomiya City 1136-3 Izumi Employees 62

We design and produce super precision jigs (Film boring jigs, a variety of cutting jigs, and precision devices). We operate precision metal stamping (t0.01 ~ thin board connecting springs, complex par...

Handheld punch with Visual Checking [film hole punching equipments]

Stress-free shooting feeling We have developed a world’s smallest ultra precision stamping die handheld punch. *Visually check for punching positions is possible. *Longevity of sharpness With the smallest clearance of less than 0.005mm, outstanding sharpness lasts for a long time. In addition, It can be used on metallic foils that are difficult to process with ordinary hand punches without burrs, deformation, and appearance of foreign substances. *Light weight and compact size It is designed to be light weight and compact which can easily handled by females. It is possible to punch with applying less force, resulting in the increase of operational efficiency! Shock resistant design The jamming doesn’t appear even if it is dropped unintentionally. *Less foreign substances intervention will occur due to use of this product. We have 4 kinds of standard sizes! We also have 7 different colors, allowing you to apply them to recognize different manufacturing processes and shapes. It’s possible to add convenient options. Please send us documents with required measurements. For more details, please check our web site.

Main 3 products Design and production of ultra precision jigs  Design and production of precision stamping dies, and production of precision stamping parts  Production of precision machine parts and precision stamping die parts
Type of manufacturing Jigs and tools  Industrial machinery  Not selected
Recommended manufacturing category

1:Die manufacturing - Press die - Blanking die

2:Parts manufacturing - Other parts - Blade manufacturing

3:Development and production of prototype/Small-scale production - Jig manufacturing - General jig manufacturing

4:Mass production - Metal press - Combined press-joining

5:Product manufacturing - Medical equipment manufacturing - Medical equipment manufacturing

6:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing

7:Mass production - Grinding processing - Plane grinding

8:Surface treatment - Polishing/Lapping - Mirror polishing

9:Designing - Jig and tool designing - General jig designing

35.

Yoshida Industries Co., Ltd. Location:  Nagano  Saku-shi 793-13, Nagatoro Employees 230

Manufacturing company, we are specialists in gravity die casting for aluminum, CNC turning, and machining as high accuracy. Introduced a laser-sintering system for sand mold and cores to deal with RP...

Super quick delivery 3D additive manufacturing (3D printer) service of sand mold and core for casting

■ Sand casting 3D additive manufacturing (3D printer) service for ferrous and non-ferrous materials We manufacture sand molds and cores for casting based on 2D (2D) or 3D (3D) data provided by the customer. The main mold, the core, and the integrated mold of the main mold and the core can be molded.   1) Moldable size: 800 mm (width) x 440 mm (depth) x 400 mm (height) 2) Molding accuracy: ± 0.2 mm ~ 3) Laminate thickness (pitch): 0.2 mm ~ 4) Sand mold material: Cera beads (artificial silica) resin content about 2.5% 5) Compatible casting materials: Aluminum and iron, copper, for brass 6) Delivery date: For 2D data, 7 days (including 3D data creation) 5 days for 3D data ※ Changes according to the product shape 7) File format: IGES, STEP, parasolid, etc. (based on IGES and solidworks data) <Support for customer request for quick delivery! ! > Don't you have a problem with the customer's request for quick delivery of castings? The production of wooden molds (resin molds) is not in time for the delivery time required by your customers! We will support you in such situations. We will deliver the required sand mold from the mold drawing (2D and 3D) with a 3D printer in a short time. <Responding to design changes is too late! > I think that there are many customers who want to change circuits such as "core only", oil passages and water passages. Correcting the wood pattern each time is a very difficult task. In addition, I think that there are cases where you cannot return to the original shape after changing it. We will create cores in the sand 3D printer in the required quantity for trial production and provide them to your company. It can be handled like cores used in ordinary sand castings, so please use it for trial production. We are happy to answer any questions, inquiries or requests. Please feel free to contact the person in charge below. ------------------------------------------------------- Yoshida Industires Co.,Ltd. PIC:Maruyama (Mr) Business Development Dept TEL:0267-54-8047 FAX:0267-54-8084 E-Mail:info@yoshidanet.com HP:http://www.yoshidanet.com/ -------------------------------------------------------

Main 3 products Metal turning parts, aluminum casting parts for brake of automobiles  Metal turning parts, aluminum casting parts for construction machines  RP aluminum casting parts for prototype
Type of manufacturing Transportation equipment  Industrial machinery  Heavy electric machinery
Recommended manufacturing category

1:Mass production - Casting - Gravity casting

2:Development and production of prototype/Small-scale production - NC machining - NC lathe machining

3:Designing - Mold designing - Casting die designing

4:Mass production - Casting - Prototype casting

5:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing

6:Mass production - Casting - Precision sand casting

7:Development and production of prototype/Small-scale production - Prototype processing - Aluminum die-casting

8:Designing - Simulation - Casting

9:Mass production - Mechanical processing - Machining

10:Die manufacturing - Casting die - Wooden model

36.

Castem Location:  Hiroshima  Fukuyama City 1808-1 Nakatsuhara, Miyuki-Cho Employees 268

CASTEM Group has grown to a global company operating in Japan and Southeast Asian countries with the core business of precision casting. Now we are at a turning point but we always have one faith, ...

【Difficult To Process Materials】We Will Have Cobalt-Based Alloys (Heat Proof And Wear Resistance) Coloring, Washer, Ring, Sleeve In Near Net Shape Using Lost Wax Precision Casting. 【Special Alloy】

【Proposal Of Near Shape】  Difficult to process materials like satellite are expensive and to process such materials into washer, color, or sleeve can be time consuming and costly. In such cases, lost wax casting can be effective in the way that it can transform a roll material into near finished shape. In other words, minimization of additional treatments, reduced processing time, and reduced cost. As a side note, depending on required precision, cast produces can be used without any other after treatments. 【Combination With Cheap Mould】 We use cheaper mold, “Quick System (lost wax mold price 49000 yen ~),” for a palm size (60x90x50) small lot (10 pieces ~) trial production. A combination with this system, greater amount of cost reduction can be expected. (Y.I)

Main 3 products N/A    
Type of manufacturing Machine tools  Industrial machinery  Medical equipment
Recommended manufacturing category

1:Mass production - Casting - Lost-wax

2:Mass production - Plastic - Metal injection molding (MIM)

3:Die manufacturing - Casting die - Lost-wax casting die

4:Die manufacturing - Powder metallurgy mold - Powder metallurgy mold part manufacturing

5:Mass production - Casting - Prototype casting

6:Mass production - Casting - Cast-iron

7:Development and production of prototype/Small-scale production - Machining - Sintered metal

8:Development and production of prototype/Small-scale production - Machining - Casting

9:Mass production - Casting - Metal injection molding (MIM)

10:Development and production of prototype/Small-scale production - Machining - Copper alloy

37.

Nakata Co., Ltd. Location:  Osaka  Yao 5-1-15 Kamio-cho Employees 36

At Nakata Co., Ltd, we perform cutting on aluminum precision parts in Yao, Osaka Prefecture. We undertake bulk aluminum processing even in small-scale production for products like semiconductor manuf...

Precision aluminum processing: mirror production

Precision aluminum processing: We can produce mirrors simply by cutting (using special cutting tools) aluminum material (A5052). We have achieved surface roughness of Ra0.02 (Ry0.15 - 0.30) by cutting with machining tools! Note: Cut mirrors have different properties from polished mirrors. Consult with us on how you intend to use them.

Main 3 products Aluminum precision parts for semiconductor and LCD manufacturing equipment  Aluminum precision parts for medical devices  Microfabricated parts (can handle all types of materials)
Type of manufacturing Industrial machinery  Medical equipment  Jigs and tools
Recommended manufacturing category

1:Development and production of prototype/Small-scale production - Machining - Aluminum alloy

2:Development and production of prototype/Small-scale production - NC machining - Machining (vertical)

3:Development and production of prototype/Small-scale production - NC machining - 5-face/5-axis machining

4:Development and production of prototype/Small-scale production - Machining - Handles microfabrication

5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing

6:Development and production of prototype/Small-scale production - Prototype processing - Chassis prototype manufacturing

7:Development and production of prototype/Small-scale production - NC machining - Combined lathe machining

8:Development and production of prototype/Small-scale production - NC machining - Handles 3D processing

9:Surface treatment - Polishing/Lapping - Mirror polishing

10:Mass production - Casting - Prototype casting

38.

OTIS Co., Ltd Location:  Okayama  Maniwa Nakahara 202-13 (Maniwa Industrial Complex No.13) Employees 205

We, OTIS, are the electronic parts maker specialized in precise pressing manufacturing functional materials: double sided tapes, films, and cushions into a multilayer. OTIS processed products are ...

【0.3mm Thickness Mass Production Achievement】 Smart phones dieing out press for panel stabilizing double-sided tape, prototype, mass production 【Slim Border】

Current Smart phones, tablets, and mobile devices’ monitor sizes are becoming larger and thinner, in other words, monitor surroundings are also becoming thinner. Since the place where the double sided tapes are applied to stabilize a glass cover and touch panel is becoming narrower, meaning balancing both adhesion strength and waterproof is one of the problems to be solved. At OTIS, by utilization of our unique process technologies, 【punching die/blade requirement】【analysis and analyze of materials】, we have achieved to punch press double sided tape pouch pressing with a width of 0.3mm. We also have achieved in manufacturing a variety of double-sided tapes: non-woven base, PET base, foam body base, Acryl foam, special base etc. Our facility is equipped with cutting plotter, in other words, a small lot sampling can be handled in a speedy manner. We can handle short lead time prototyping or mass production inquires clean room in Japan and/or China. Trust manufacturing service is also available.

Main 3 products Complex precision punching press for functional materials (cushion, double sided tape, film, sheet, metal foil, etc. )  Metal films (in-house developed shield gasket: conduction, contact, EMS protection, static electricity protection, shielding, and grounding)  Designing and developing of rotary screen printers (functional materials), original processing machines, molds, and jigs.
Type of manufacturing Telecommunication equipment  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Rubber - Press stamping

2:Development and production of prototype/Small-scale production - Prototype processing - Punching

3:Mass production - Plastic - Film-lamination

5:Mass production - Rubber - Home electrical appliances

6:Mass production - Rubber - Tire, wheel, and other auto parts

7:Mass production - Rubber - Packing-related products

8:Mass production - Rubber - Mobile phones

9:Die manufacturing - Press die - Designing

10:Auto parts manufacturing - Body part - Other body parts

39.

HORIKO.Co.,Ltd Location:  Tokyo  Musashimurayama Honnmachi 2-103-5 Employees 100

Building system integrating high-precision equipment and sheet metal machining technology and simple molding technology and welding technology for our highly difficult product to deliver customer sati...

Main 3 products press forming processing technology  production of stamping dies by utilizing three-dimensional CAD/CAM and forming simulation  sheet metal machining integrated manufacturing system
Type of manufacturing Transportation equipment  Jigs and tools  Not selected
Recommended manufacturing category

1:Mass production - Metal press - Drawing

2:Development and production of prototype/Small-scale production - Sheet-metal processing - Sheet metal protocol manufacturing

3:Designing - Mold designing - Drawing metal press die designing

4:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - TIG welding (argon welding)

5:Development and production of prototype/Small-scale production - Sheet-metal processing - Chassis manufacturing

6:Mass production - Metal press - Aluminum

7:Mass production - Metal press - Stainless steel

8:Mass production - Metal press - Iron

9:Mass production - Metal press - Thickness: 3.2 - 9.0 mm

10:Mass production - Metal press - Thickness: 0.2 mm - 3.2mm

40.

Meiho Co., Ltd. Location:  Fukuoka  Nogata City 811-1 Ganda Employees 178

Three reasons why Meiho is chosen 1. Reliable quality of precision molds and molded products ・ Mold design that incorporates knowledge from the molding site ・ High-precision mold design and ma...

Pipe coupling parts for automobiles [HDPE small lot trial production mass production injection molding resin]

Material: HDPE (High Density Polyethylene) Work: Injection molding Shape / size: 95mm x 58mm Industry / Part Name: Automotive Industry Equipment name: Horizontal injection molding machine 110t Functionality: High rigidity, impact resistance, water resistance, chemical resistance, insulation Details of improvement: Resin replacement Response: Small lot, trial production, mass production Remarks: A part for connecting resin fuel filler pipes for automobiles (near the fuel filler port).

Main 3 products Precision plastic molding mold   Precision plastic molded products  Small injection molding machine
Type of manufacturing Industrial machinery  Electronic parts  Medical equipment
Recommended manufacturing category

1:Mass production - Plastic - Thin wall molding

2:Die manufacturing - Plastic mold - Thin wall injection molding die

3:Die manufacturing - Plastic mold - Injection molding die

4:Designing - Mold designing - Injection molding die

5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing

6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold

7:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding

8:Development and production of prototype/Small-scale production - Prototype processing - Simplified/Molding

9:Die manufacturing - Plastic mold - Thermoset resin die

10:Die manufacturing - Plastic mold - Blow molding die

31-40 / 2793 hits

New registration