41-50 / 16208 hits
Inspection robots for curved and mirror exterior surfaces ◆Futures ・This robot can inspect multiple exterior surfaces, including curved surface and mirror surface. Articulated robot will adjust its camera head to the ideal position, depending on work surface; optical system, specially made for mirror finished surface, will detect micro defects allowing defect detecting software to extract defects. ◆Detectable defects ・The detectable defects are as followed: scratches, pin holes, dents, and any other defects that can be found on surfaces of products. ・By adjusting view to be smaller, it is possible to detect a few μ defects. ◆Target The robot can inspect any shapes with a size range of a cell phone case size to a door for automobiles. ・polished metal products Cell phones, PCs, electronic appliances, and automobile parts. ・coated products Most electronic appliances, the body of automobile. ・Machined products Resin products (such as cases). ◆Design - 0 production and 0 placement At our company, we can propose a plan including before and after (for example: transportation) manufacturing. ◆Existing inspection system ・foreign article inspection ・characteristic inspection ・code (QR, bar code, etc) reader ・word reorganization ・product number selection ・custom inspection ・PAC activation ・dummy activation
| Main 3 products | designing/producing of Industrial labor-saving machines designing/producing of jigs and tools maintenance of equipment and facilities |
|---|---|
| Type of manufacturing | Measuring machinery Industrial machinery Not selected |
| Recommended manufacturing category |
Material: HDPE (High Density Polyethylene) Work: Injection molding Shape / size: 95mm x 58mm Industry / Part Name: Automotive Industry Equipment name: Horizontal injection molding machine 110t Functionality: High rigidity, impact resistance, water resistance, chemical resistance, insulation Details of improvement: Resin replacement Response: Small lot, trial production, mass production Remarks: A part for connecting resin fuel filler pipes for automobiles (near the fuel filler port).
| Main 3 products | Precision plastic molding mold Precision plastic molded products Small injection molding machine |
|---|---|
| Type of manufacturing | Industrial machinery Electronic parts Medical equipment |
| Recommended manufacturing category |
1:Mass production - Plastic - Thin wall molding 2:Die manufacturing - Plastic mold - Thin wall injection molding die 3:Die manufacturing - Plastic mold - Injection molding die 4:Designing - Mold designing - Injection molding die 5:Development and production of prototype/Small-scale production - Prototype processing - Small-size prototype manufacturing 6:Development and production of prototype/Small-scale production - Prototype processing - Simple mold, prototype mold 7:Development and production of prototype/Small-scale production - Prototype processing - Prototype/Small-lot molding 8:Development and production of prototype/Small-scale production - Prototype processing - Simplified/Molding 9:Die manufacturing - Plastic mold - Thermoset resin die 10:Die manufacturing - Plastic mold - Blow molding die |
"Proposal of camera cleaning unit for automobiles Small DC pump (micropump mechanism / structural design) / housing molding / assembly ① ADAS driving support & security Back monitor parts for driving support system ② Small DC pumps (micro pumps) are proposed from the mechanical and structural design and produced at our factory. ③ Some of the resin molded products, (including housing molding) are produced at our factory. Features High flow rate, high pressure, optimal unit design (1) Achieve cleaning power with high flow rate and high pressure. (2) Further noise reducing and vibration by designing the mechanism and structure of the unit. Application Automobile parts, cleaning pump unit for back monitor For cleaning camera lenses Improve monitor visibility * We will respond promptly to inquiries □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ TADA PLASTIC INDUSTRIAL CO.,LTD. 2-12-8, Tsudo, Fujiidera Shi, Osaka, Japan 583-0037 TEL：0081-729540981 http://www.tadapla.co.jp Ideas and technology that lead to innovation Fusion technology Injection molding Urethane foam Micro pump Precision rubber molding □□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□
| Main 3 products | Compact DC pump Injection molding Urethane foam |
|---|---|
| Type of manufacturing | Transportation equipment Electronic parts Medical equipment |
| Recommended manufacturing category |
1:Mass production - Plastic - PU (polyurethane) 2:Mass production - Plastic - Expansion molding 3:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 4:Mass production - Plastic - Gas injection 5:Mass production - Plastic - Injection molding 6:Mass production - Plastic - 60 - 300 t 7:Mass production - Plastic - PPS (polyphenylene sulfide) 8:Mass production - Plastic - CFRP (carbon fiber reinforced plastic) 9:Mass production - Plastic - PBT (polybutylene terephthalate) 10:Mass production - Plastic - Elastomer |
This solid black surface treatment can treat difficult shapes made of various materials. Maximum treatment size (mm): 200 x 600 x 600. For details visit our company website.
| Main 3 products | Special surface processing (Teflon impregnation) Energy-saving food processing machinery manufacturing and vendor IC production equipment manufacturing and vendor |
|---|---|
| Type of manufacturing | Industrial machinery Measuring machinery Jigs and tools |
| Recommended manufacturing category |
1:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (large) 2:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (rack) 3:Surface treatment - Plating/Chemical conversion treatment - Black nickel 4:Surface treatment - Plating/Chemical conversion treatment - Hard alumite 5:Surface treatment - Plating/Chemical conversion treatment - Alumite (anode oxidation) 6:Surface treatment - Plating/Chemical conversion treatment - Hard chromium (rack) 7:Surface treatment - Other surface treatment - Buffing 8:Product manufacturing - Production property - Packaging machinery manufacturing 9:Product manufacturing - Production property - Food industry machinery manufacturing 10:Product manufacturing - Production property - Other industrial machinery manufacturing |
Matte (soft tone) plating is now can be handled by barrel plating. Conventionally, soft-tone plating could only be done with a rack plating. Rack plating enables high-quality plating, but since it is necessary to set each item on the jig manually, there is a limit to cost reduction. Recently we developed a barrel type soft tone plating. With barrel plating, it is not necessary to set each item on a jig, and depend on the device summary processing is possible so we can reduce the cost. It is suitable for small products in large numbers. Available plating types ・ Gold plating ・ Silver plating ・ Black alloy plating ・ Trivalent chromium plating ・ Ni plating ・ White alloy plating * Prototypes and sample production are available from small amount. We look forward to hearing from you.
| Main 3 products | Precision plating (electroless nickel. Lubricating plating / composite plating) Gold and silver for semiconductor parts. Various types of plating such as tin Ultra-precision / fine pattern transfer technology and mold manufacturing |
|---|---|
| Type of manufacturing | Electronic parts Home electrical appliances Telecommunication equipment |
| Recommended manufacturing category |
1:Surface treatment - Plating/Chemical conversion treatment - Chromium (rack) 2:Surface treatment - Plating/Chemical conversion treatment - Gold/Silver plating 3:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (rack) 4:Surface treatment - Plating/Chemical conversion treatment - Electroless nickel (barrel) 5:Surface treatment - Plating/Chemical conversion treatment - Aluminum 6:Surface treatment - Plating/Chemical conversion treatment - Zinc die-cast 7:Surface treatment - Plating/Chemical conversion treatment - Stainless steel 8:Surface treatment - Plating/Chemical conversion treatment - Brass 9:Surface treatment - Plating/Chemical conversion treatment - Iron 10:Surface treatment - Plating/Chemical conversion treatment - Tin (barrel) |
This product is for bundling various kinds of paper together. This can handle from a single sheet of paper to papers folded in 2,3, ....plurally folded paper. This is also equipped with Double-Feeding Detection System. In Japan, this is generally used for auto-insertion of flyers, pamphlets etc. into daily newspaper. This products is highly expected to have further possible usages in your country. Genesis collator is the labor-saving machinery which combines different varieties of papers to one sheaf. In Japan, we use Genesis collator to gather vehicles known as “Chirashi (flyer)” into a set. Since a copier has an ability to sort papers, it can’t cope with flyers because they come in with different paper qualities and unique ways of folding. The machine proceeds and collates any type of paper in the same way as long as it meets the specific requirement.That is our proud product “Genesis collator". Because Genesis collator has to gather flyers with a various qualities of papers into a single set, it is equipped with a double feeding detection system, which thought to be difficult to design. Our an unique double feeding detection system will prevent from future double feedings which may occur during the state in which papers clung easily due to paper quality, ink, moisture, or static electricity. In addition, by utilizing “KNS sheet”, which is registered utility model an optional part for the collator, enables the machine to proceed and gather easily clung papers without any difficulties. Genesis collator also detects “missed inserts” and "paper jams" automatically, and it displays the errors clearly on a tablet terminal which prevents a missing page or disarranged pages greatly. Capacity 150papers/min. Paper size Postcard～A3 size / ordinary shelf B5～B3/ folding shelf Paper feeds Diagonally piling up (can be heap up) Dimension mm Height 1,975-1,475 (depend on the model) Width 720 (all models common) Depth while using: 1,322-1,270 (depends on the model) While Storing 992-965 (depends on the model) Weight (kg) 430-270 (The following are Japanese specifications'' reference data) Motor rating 750W Power supply AC100V 50/60Hz Consumption electricity 700W - 1,100W (depends on the model) Operating temperature -10℃ ～+50℃ Preservation temperature -20 ℃～+60 ℃s Registered patent ■Patent: The sheet feeding apparatus for the paper collator The pin wheel No: 3382705 ■Patent: Newspaper inserts paper collator Quantity display dropout paper NO:4187245 ■utility models : Separation force adjustment tool of the the paper feeder Rubber chip hidden NO:3126986 Patent pending ■special permission Patent ApplicationNO: 2010-284161 collator The Double feed detection by Ultrasonic Others
| Main 3 products | Machining, NC lathe |
|---|---|
| Type of manufacturing | Industrial machinery Transportation equipment Office appliances |
| Recommended manufacturing category |
1:Development and production of prototype/Small-scale production - NC machining - NC lathe machining 2:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Robot welding 3:Development and production of prototype/Small-scale production - Sheet-metal processing - Can manufacturing 4:Development and production of prototype/Small-scale production - NC machining - Machining (vertical) 5:Designing - Industrial equipment designing - Industrial machinery designing 6:Designing - Industrial equipment designing - Energy-saving machinery designing 7:Assembly/Inspection - Assembly - Industrial machinery assembly 8:Development and production of prototype/Small-scale production - Welding/Adhesive bonding - Arc welding 9:Development and production of prototype/Small-scale production - Machining - Keyway milling 10:Designing - Industrial equipment designing - Carrier machine designing |
Nursing Aid, “Hasameru (はさめーる),” developed from a general purpose plastic (pp). As shown in the picture, simply hold the grip lightly and holding chopsticks become easy. It also can be used as a potholder, in other words, can be used while deep frying. Not only for those whom are handicapped, but also it is a great practice tool for those who never used chopsticks as well. It is easy to attach and remove. Try it with your favorite chopsticks. Method：Injection Molding Material：polypropylene（PP) For ordering, please access below link. http://www.daiwa-pls.co.jp/fukushi/index.html (Osaka）
| Main 3 products | Automobile Parts (Thermosetting Resin Pulley) Heavy Electronic Industrial Machinery Parts (Breaker Parts) Composite Molding with Metals |
|---|---|
| Type of manufacturing | Heavy electric machinery Industrial machinery Transportation equipment |
| Recommended manufacturing category |
1:Mass production - Plastic - Thermoset resin 2:Mass production - Plastic - Insert molding 3:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 4:Mass production - Plastic - Injection molding 5:Mass production - Plastic - Engineering plastic 6:Mass production - Plastic - Compaction moldingicompression, direct pressurej 7:Mass production - Plastic - Rotational/Slash/Dip molding 8:Mass production - Plastic - PPS (polyphenylene sulfide) 9:Mass production - Plastic - General-purpose material 10:Mass production - Plastic - Thin wall molding |
ROSLIMBOARD H is a low thermal conductivity heat-insulation material and exhibits high performance, thus saving energy and space for equipment. ・Size of Blank Material Thickness : 25, 50mm Length X Width : 600X900 mm ・Applications Heat (Thermal) insulation material for industrial furnace (backup material) Heat (Thermal) insulation material for combustion equipment Heat (Thermal) insulation material for melting and holding furnace
| Main 3 products | Heat insulation(thermal insulation) and heat resistant materials (rigid heat insulation boards that are generally made of glass fiber, cement and mica as the main raw material) Composite of glass fiber or carbon fiber and plastics (FRP, GFRP and CFRP). Fine ceramics |
|---|---|
| Type of manufacturing | Industrial machinery Jigs and tools Electronic parts |
| Recommended manufacturing category |
1:Mass production - Plastic - FRP (fiber reinforced plastic) 2:Mass production - Plastic - GFRP (glass fiber reinforced plastic) 3:Mass production - Plastic - CFRP (carbon fiber reinforced plastic) 4:Mass production - Plastic - Thermoset resin 5:Mass production - Plastic - EP (epoxy) 6:Development and production of prototype/Small-scale production - Machining - Machining (resin) 7:Development and production of prototype/Small-scale production - Machining - Lathe machining (resin) 8:Material - Plastic material distribution - PF (phenol-formaldehyde) 9:Development and production of prototype/Small-scale production - Machining - Ceramic 10:Material - Specialized material distribution - Ceramic material |
The picture shows special blind nut. The threaded part is available up to M8. There is a hexagonal part with a thickness of 1 mm under the neck, which is a strong detent. It is made-to-order product from mold making.
| Main 3 products | Cold forging processed goods Special screw, special bolt Hollow nut, collar |
|---|---|
| Type of manufacturing | Electrical component for transportation equipment Construction material Audio-video equipment |
| Recommended manufacturing category |
1:Parts manufacturing - Bolt/Screw/Nut - Bolt/Screw/Nut manufacturing 2:Parts manufacturing - Bolt/Screw/Nut - Screw manufacturing 3:Parts manufacturing - Bolt/Screw/Nut - Nut manufacturing 4:Mass production - Forging - Header machining 5:Parts manufacturing - Bolt/Screw/Nut - Bolt manufacturing 6:Parts manufacturing - Bolt/Screw/Nut - Screw manufacturing 7:Mass production - Mechanical processing - Stainless |
Unique!! Only this robot can detect the surface of liquid glass! Under "high-mix low-volume" production, this robot can achieve high productivity, reliable quality, and less manpower. The robot can be used for any shape of melting furnace and can be used in limited spaces. Of course we provide all the assistance you need to set up, start up, and operate the robotic system.
| Main 3 products | N/A |
|---|---|
| Type of manufacturing | Electronic parts Lighting equipment Audio-video equipment |
| Recommended manufacturing category |
1:Surface treatment - Other surface treatment - Vacuum deposition 2:Mass production - Glass/Silicon - Glass mirror polishing 3:Mass production - Glass/Silicon - Other glass manufacturing 4:Surface treatment - Other surface treatment - Other physical vapor deposition methods (PVD) 5:Surface treatment - Other surface treatment - Coating |
41-50 / 16208 hits
